Telescopic Ramp

Loading ramps are used in areas where transportation vehicles need to be loaded on a ground level below a concrete platform and where there is no construction obstacle on the ground. Although the loading ramps function similar to each other, they are divided into 2 parts. These are Hinged Ramps and Telescopic Ramps.

While loading/unloading from the concrete floor of the warehouse/warehouse with forklift, pallet truck, etc., a height difference (slope) arises between the transport vehicle approaching the warehouse and the loading floor. The industrial loading system that will ideally eliminate this slope is the hinged and telescopic ramps, which we call "loading ramps". This slope determines the load tonnage to be transported on the hinged ramps, the type of transport vehicle, the type of transport vehicle used, etc. After the factors are determined through mutual discussions, the most suitable "Loading Ramp" model is suggested for you.

Hinged or telescopic loading system, when used together with bellows, provides optimum benefits in preventing heat loss during loading/unloading and ensuring hygiene.

• Transport vehicles located at a different level (up or down) from a concrete platform need to be loaded and the loading ramp must also reach the transport vehicle with a tongue,
• If there is no obstacle to the construction process on the ground of the high area to be loaded,
• If there is no heat loss from the warehouse during the loading/unloading process,
• If the loading/unloading process is to be used with a bellows system,
• If hygiene is important in the loading/unloading process and there is a need for maximum avoidance of dust, etc., then you need a Telescopic type Loading ramp .

Telescopic loading ramps are embedded in a specially prepared pit in the concrete floor.

Loading ramps are used in areas where transportation vehicles need to be loaded on a ground level below a concrete platform and where there is no construction obstacle on the ground. Although the loading ramps function similar to each other, they are divided into 2 parts. These are Hinged Ramps and Telescopic Ramps.

While loading/unloading from the concrete floor of the warehouse/warehouse with forklift, pallet truck, etc., a height difference (slope) arises between the transport vehicle approaching the warehouse and the loading floor. The industrial loading system that will ideally eliminate this slope is the hinged and telescopic ramps, which we call "loading ramps". This slope determines the load tonnage to be transported on the hinged ramps, the type of transport vehicle, the type of transport vehicle used, etc. After the factors are determined through mutual discussions, the most suitable "Loading Ramp" model is suggested for you.

Hinged or telescopic loading system, when used together with bellows, provides optimum benefits in preventing heat loss during loading/unloading and ensuring hygiene.

Telescopic Ramps are manufactured in 2mx2,5m and 2mx2m standards and 6 tons capacity as standard, but they can be manufactured in accordance with any tonnage carrying capacity according to demand and need. Special production ramps should be preferred for unusual vehicle and warehouse heights and different tonnages. Please contact us to determine the most suitable telescopic ramp for your needs.