Plastic Pet Bottle Recycling Line

Usage Area: Pressed, Open pet, pe and nylon product groups

Intended Use: Production of flakes and burrs from products

Explanation: Our production line, which is designed for the recycling of waste plastic lines, has been planned to enter 2000-2500 kg bottles per hour. The production line is suitable for production with or without bales, and the number of machines and production planning may vary depending on the product.

Our differences;

1. Ballistic separator; By using this machine in the production line, the load of the sorting band has been reduced. Thus, less employee employment is targeted.
2. Double Refraction; Thanks to the fact that the crusher, which is one of the most critical machines, is redundant to each other, loss of efficiency due to breakdowns and maintenance stops has been prevented.
3. Electro Magnetic Conveyor; With this method, which is much more efficient than natural magnets, metal unwanted foreign materials that may escape into the crushing machine are kept away.
4. tromel; With different hole diameters, materials such as dust and caps do not mix with each other, so waste products can be evaluated more easily.
5. Cover Label Pool; More efficient washing and separation can be done thanks to the fact that the upper part is a spiral whisk.
6. Hot Washing Unit; Thanks to its 8-corner structure, the product's contact with each other has been increased and the washing process has been made healthier.
7. Mechanical Dryer; Thanks to its 12 corner structure, the dewatering process is more efficient.
8. Bigbag filling; With the engine power used instead of compressed air, a quieter, lower energy cost and 10-15% more efficient filling is realized.

Below is the list of machines in the production line, their quantity and relevant information for their use.

• Steel Conveyor ; 1 pc, Product transfer
• Bale Opening ; 1 pc, Product thinning
• Ø700 Screw ; 5 pieces, Product transfer
• Ballistic Separator ; 1pc, Product sorting
• Electro Magnetic Conveyor ; 1 pc, Metal separation
• tromel ; 1 pc , Plastic washing-separation
• Sorting Belt and Platform; 1 piece, Sorting the product into groups, sorting
• Conveyor belt; 1 pc, Product transfer
• Silo (Before Crushing); 1 pc, Intermediate stock
• 800/1600 Refraction; 2 pieces, Product shredding and bringing to the desired size
• Ø300 Screw; 12 pieces, Product transfer
• Friction Washing; 4 units; Product washing-cleaning
• Silo (Broken product); 1 pc; Broken product stock
• Cover Label Pool; 3 pcs, Product washing-separation
• Hot Washing Unit; 3 pcs, Product wash
• Mechanical Dryer; 3 pcs, Product dewatering-dehumidifying
• Rotary Dryer; 1pc, Dehumidification
• Eddy Current Separator; 1 pc, Metal/Nonmetal separation
• Powder Label Retrieval; 1 pc
• Bigbag Filling; 1 pc, Bagging the product