Side-Walled Tipper

Side-Walled Tipper Technical Specifications

Body

• Length between 7,500 mm and 9,500 mm, straight front line, 2,420 mm internal and 2,550 mm external width.
• 3 or 4 side doors on each side.
• Rear door is gooseneck type and opens in two sections.
• 950 mm doors with double 350 mm x 350 mm extensions.

Hydraulics

• Tipping motion is performed by a 5-stage heavy-duty telescopic cylinder providing a 45° tipping angle (LIFT seamless cold-drawn pipe).
• Hydraulic oil tank with suction filter, pneumatically controlled tipping valve, dual-speed lowering valve, and safety limit control.
• The oil tank is mounted on the trailer, with hydraulic connection to the tractor via two quick couplings.

Chassis

• Reinforced “I”-section main beams, welded with 120/12 mm top and bottom flanges and 5 mm web plate using an automatic submerged arc welding machine.
• These beams are braced with traverses to prevent torsion and provide structural rigidity.

Axles

• Equipped with 3 axles, each with a 12-ton capacity.
• Brake linings and heavy-duty brake levers conform to TSE standards.

Suspension

• Automatic air suspension dump system (UNLOADING LEVEL).
• Parabolic double-leaf Z springs and shock absorbers.

Front Axle Lift

• Cabin-controlled front axle lifting system.

Tires and Rims

• 385/65 R22.5 tires (6 + 1 units).
• 11.75 x 22.5 rims (6 + 1 units).

Electrical System

• Complies with SAE standards and TÜV general regulations.
• Electrical connection via 7-pin socket from the towing vehicle.
• Both sides are equipped with required traffic warning and lighting systems.
• Rear includes park, stop, signal, and license plate lights, trailer reflectors, and amber side indicators.

Brake System

• EC-standard 71/320/EWG FF braking system.
• Automatic brake adjusters, 4 emergency and 2 service brake chambers.
• 2S/2M EBS with RSS (Roll Stability Support) system for enhanced stability.
• Swedish-patented Ruffels coupling system prevents potential air leaks in the trailer.

King Pin

• 2" (DIN 74080) or 3½" (DIN 74083) king pin made of 42 CRMO4 steel.

Support Legs

• Dual-speed telescopic mechanical landing legs with a 24-ton load capacity.

Paint

• Chassis and superstructure are washed, sandblasted, and painted in an oven using a 2+1 coat acrylic paint system.

Color

• Determined according to customer preference.

Standard Accessories

• Sectional plastic fenders covering the rear axle tires.
• Two steel and one plastic toolbox.
• Control panel (push-pull valve, air gauge, ramp lever).
• Plastic water tank.
• Roller-type spare wheel carrier.
• Aluminum side impact bar.
• Wheel chock and holder.

Optional Features

• European axle group and related equipment.
• Imported steel (Domex-Hardox).
• Aluminum rims.
• Additional axle lift.
• Second lift axle.
• Retractable bumper.
• Fire extinguisher cabinet and cylinder.
• Optional tire brands.
• Optional side door and extension sizes.
• Optional RAL color codes.