LPG Semi Trailer Tank

BRAND

DGN YLDZ

TANK TYPE

Horizontal Cylindrical

PROJECT CODE

AD- Merkblatter / EN 13445

DESIGN TEMPERATURE

Min -20˚C / max +50˚C

DESIGN PRESSURE

17,5 bar

TEST PRESSURE

26,5 bar

MATERIAL

P355 GH or P355NH

HEAD TYPE

Elipsoidal

EXTERNAL TANK DIAMETER

2.400 mm

BODY TANK THICKNESS

10 mm

HEAD TANK THICKNESS

12 mm

TOTAL LENGTH OF TANK

13.200 mm

CORROSION

1 mm

TANK VOLUME

 55 m3

EQUIPMENT TANKS OVER

Hydraulic Operator à1 unit
2 "Ball Valves à3 units àBATU

2” Hydraulic valvesà 2 unitsà ATILIM

3” Hydraulic valvesà 1 unità ATILIM
2 "Safety Valveà2 units à ATILIM

Rotogauge (Rotary Level Indicator) à 1 unit àATILIM
Glycerine pressure gauge (0-25 bar), Ø 63 à 1 unit àPAKKENS
Thermometer (-30 / 60 ˚ C) Ø63 à 1 unitàPAKKENS
Acme Filler Cap à 3 unitsàATILIM
Manholeà 1 unit 16”

Filterà 1 unit

Blasting and Painting

Before painting, the Tank will be sand blasted with SA 2.5 quality undercoat & polyurethane based white topcoat applied providing a total thickness of min. 150 microns. COLOUR: RAL…

Control (Inspection and Tests)

All tests & inspections mentioned below wiil be carried out under the control of third party & certified by the same authority.

• Checking & approval of design & calculations,
• Material inspection & stamp transferring seperately,
• Visual & dimensional inspection plate orientation,
• Head control,
• Radiographic control,
• Penetrate dye test,
• Hydrostatic test

The reports of the A/M tests & inspections will be presented to the customer together with the inspection certificate of teh tank whicih will be given by the third party after the completion of the tank & the inspections. BUREAU VERITAS

CERTIFICATION

ISO 9001-2008 VE EN 3834-2

WELDING METHOD

• welders are certified according to EN 287-1:2004 standard. Full penetration will be provided in weld seams. Welding will be carried out as submerged arc welding by welders.The Grooves will comply with EN ISO 9692-2. & The Filling Material with EN ISO 14171 & The Flux with EN 760.

HEAT TREATMENT

Only Heads will be applied relieving stress.

BAFFLES

Tank will have  3 units of Anti-slosh baffles.

3 AXLES  SEMI-TRAILER

CHASSIS

Half chassis made of 6252 steel quality. HEAVY DUTY  Type

AXLE

Brand: OSMAN KOC.  Capacity: 3X12 tons/per axle Type:  :  Air suspension Axle Drum Brake

SUSPENSION SYSTEM

Air Suspension

BRAKE SYSTEM

WABCO ABS (GERMAN)

LIFTING JACK  (LANDING GEARS)

OMS  brand with double speed and the capacity to carry 25 tons each.

TYRES

Size 385X65X22,5 BRIDGESTONE 6+1 units.

RIMS

Size is R22,5  6+1 units JANTSA Brand

FENDERS

Steel body with Aluminium covering

KING PIN

2 " flange and a high level of beating stress and rupture-resistant steel and bolted to the system has been dismantled and can be changed easily. OMS

King Pin plate thickness will be 12 mm and will be reinforced with min. 3+2 steel 160 NPU.

ELECTRICAL SYSTEM

There are 24 V electrical system with European norms. In addition, tank-top and trailer top and the electric lamp and warning will be posters.  (ADR) 2 stop lights on the rear Bumper, 5 lights on the each side of the tank.

REFLECTORS

3M Brand yellow colour along both sides of the Tank and 3M Brand red colour on the rear bumper and on the rear dished Heads.

ACCESSORIES

1 unit Steel Bumper
1 unit water tank (Made of Plastic with the capacity of 30 lt)
1 unit spare tire carrier basket
2 units wheel chock and the connection
2 units Fire Extinguisher Cabinet (ADR)

2 units Food & Tool Box made of steel

Sunshade will be installed to the top of the Tank

LPG Semi Trailer Tank

YER ÜSTÜ STOKLAMA TANKI

DIESEL TRANSPORTATION TANK

LPG YER ALTI STOKLAMA TANKI

PRODUCTS

  LPG Semi-Trailer Tank

  DIESEL TRANSPORTATION TANK