Coal Packing Plant

They are manufactured for the purpose of packing coal of a maximum size of 110 mm of classified coal to be used in housing and industry.

In this facility, which is covered with trapezoidal sheet metal, weighing is done with electronic load-cells.

In addition, the counter is available so that you can produce the desired number.

Bags packed in 25 and 40 kg are sewn with fixed sewing machines.

All sides of the plant are made open or closed on request, packaging machine 2. a ladder has been designed so that you can safely climb to the floor..

Walnut "20mm/55mm "lemon" 55mm/80mm "Orange" 80mm/120mm"

The theoretical capacity of the coal packing plant is 36 - 42 tons/hour. (1440-1680 bags/hour in 25 kg bags)

In the facility, there is a 9 M3 feeding bunker No. 1 and a vibrating transmitter under it to give the material regularly.

The material in the bunker is transported to the stock bunker of the Packing Machine No. 3 by conveyor No. 2 b=650 mm wide L=22,000 mm long.

In order for the conveyor to deliver the material to the stock bunker regularly and homogeneously, there is a collection groove on the top of the bunker.

Above the stock bunker is a high-level sivici.

When the Bunker is full, the Switch gives a warning and stops the feed band and vibrating transmitter.

Bunker discharge is timed and automatically operates the supply bunker and vibrating transmitter when the time comes.

There are four B=500 mm wide dosage bands under the stock bunker.

The material from the dosage band to the automatic weighing scales is weighed here at the desired weight.

Below, when the person waiting in the throat to fill the bags presses the start switch, the bags are filled with coal that has been weighed.

At the same time, the weighing process starts automatically again by closing the scales with a pneumatic system.

At this time, the other dosage band is filled and ready.

Both dosage tape buckets were collected in a single throat.

Bags that are filled; 4 No. b=500 mm wide-move on sewing bands and are sewn by a person with a sewing machine.

Bags sewn from both sewing bands fall into the collection band No. 5 , from here the bags transferred to the loading band No. 6 are stacked in trucks through this band.

A total of seven people work in the facility, two people in the bag filling mouth, two people in the sewing belt, two people in the loading conveyor outlet and one person in the bucket operator.

The controller preserves the values set with the numeric keypad in its memory and allows the system to be operated with the start command.

Produces contact outputs at set weight values.

During the operation, communication with the operator is done by LCD screen.

It automatically tests itself.

It has automatic reset feature.

It stores used and filled materials in its memory and does not lose information in its memory during power outages.

When the electricity comes in, it resumes its operation from where it left off.

They Are Manufactured Automatically And Manually.

www.senolmakina.com.tr

info@senolmakina.com.tr

0533 364 22 13