WHEAT BULKER

TANK CONSTRUCTION :

Tank is “V” shape . Tank is built by ST 37 A1 quality  with thickness of 4 mm . Working pressure 2 bar and test pressure 2.6 bar . 2  units , 420  mm diameter   heavy duty screw type loading covers. 1 unit leaf valve , 1 unit air pressure manometer . 1 unit ball valve for speeding the discharging and 4 “ discharging system and 6 mt special alloy discharge hose and 2 unit regulated to  2.5 bar safety valve nad inside the tank including 110 mm diameter with air conduit imported hose . Upper catwalk  and Access ladder is set to trailer

AXLE :

It has a carrying capacity of 3x12 tons and donated with an automatic adjusting break lever with ABS system.Nursan Brand

SUSPENSION SYTEM :  Download and set the system to remove the height, parabolic z springs and limit excessive movement of axle damper elements

BRAKE SYSTEM :

 Brake is designed in accordance with the European standards.WABCO-  HALDEX  products are used as Equipments. Manuel break ratchets, break ventil, break bellows (30cm cylinder). There are two replaceable and protected break sockets in front of the trailer.

COMPRESSOR: NO

FRONT AXLE :  One is to remove control from the driver's cab

LANDING GEAR :

which are double revolution and each has a capacity of bearing 25 tons.OMS Brand

TYRE :

385/65 R22,5 dimension and BRIDGESTONE or LASSA  brand 6+1units.

RIM :

11,75*22,5 dimension JANTSA brand 6+1 unit

MUDGUARDS :

6 mudguard brand DOMAR

KING-PIN :

It is made of forged steel (42 Cr Mo 4) which is coherent to 2”SAE/DIN” norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

ELECTRICAL SYSTEM :

We have got 24 V electrical installment which is designed according to EU rules

There are stop lambs with many parts which consist of  reverse light and fog light on the trailer. There are 2 electrical sockets (24N/24S)   and an ABS socket on the front panel.

TANK ACCESSIORIES :

-          1 unit bumper

-          Cupboard (front and back side of the tank)

-          1 unit stainless water tank

-          1 unit single spare tyre carrier

PAINT :

the surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAL codes. 

GUARANTY  :

-         1 year spare parts ( manifactuarer guaranty )

-         1 year or 100.000 km NURSAN manifacture guaranty

DISCHARGE: BY PNEUMATIC  VALVES UNDER THE BULKER