Tipper Semi Traler - Lying To The Side
TECHNICAL SPECIFICATIONS OF SIDEWAYS FLOPPED DAMPER
SUPERSTRUCTURE
- Flat base on the front in 9.000 mm-13.600 mm sizes , also it is 2,440 mm wide inside and 2550 mm wide outside
- Platform has 4 or 5 caps and they had been installed on the rack
- Caps are 800-900 mm high.
- Platform does turn over process for one or two directions
- Platform is covered with quality plain sheet of 4 or 5 mm ST Ereğli
- Pneumatic locking system is enabled while the platform stands still and it is disabled before turn over process
HYDRAULIC
- Damper is operated by using level 7 heavy type 3-4 telescopic cylinder .(LIFT COLD DRAW SEAMLESS PIPE)
- Oil reservoir has suction filter, damper pneumatic remote, two speed elevating valve and a limit control security.
- Gas tank must be added to trailer, hydraulic contact between trailer and conveyor, is provided by 2 sockets
RACK
- Strengthened “I” section centre members are welded automatically by submerged welding machine. They are welded between 120/12 mm bottom or top flat steel and 5 mm hub plate
- These racks are supported against being twisted with each other, by binding with axle beams
AXLE SHAFT
- 3 axle shafts with the capacity of 12 tons, are used
- There are brake shoes and heavy brake levers suitable for TSE norms
SUSPENSION
- Parabolic double deck Z springs and dashpots
ELEVATING FRONT AXLE SHAFT
- Remote operated elevating system for front axle shaft in cabin
TIRES AND RIMS
- 385/65 R22,5 tires 6+1
- 11,75 x 22,5 rims 6+1
ELECTRICAL EQUIPMENT
- It is suitable forSAE standards and Tüv regulations
- Electricity is provided by 7 pin plug from vehicle
- There are necessary traffic advisory and stoplights on both sides
- There are back lights, brake lights, license plate lamps, trailer reflectors and orange colored warning lights on the sides
BRAKE EQUIPMENT
- 71/320/ewg ff brake system according to EC standards.
- Automatic slacks, 4 spring brake chambers and 2 service brake chambers.
- RSS that provides safe driving systemagainst2S / 2M EBS and rollover(Balance Control System).
- Air leaks in trailer are blocked by Sweden patented Ruffels union system
KING-PIN
- Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used
LEGS
- Two speed, telescopic, mechanical conveyor legs, with the capacity of 24 tons
PAINT
- Rack and superstructure are painted in paint drying oven by Washing + Sanding + 2+1 coat Acrylic Paint
COLOR
- It will be specified according to customer request
STANDARD ACCESSORIES
- Multi-piece plastic fenders that covers trailing axle tires
- 2 plate tool boxes
- Control Panel(Mob, air clock, access ramp lever)
- Plastic water tank
- 1 basket stare tire conveyor
- Aluminum bike impact absorber
- Mounting and mounting space
OPTIONAL SPECIFICATIONS
- European axle shaft group and all kind of equipments
- Import plates(Domex-Hardox)
- Aluminum rims
- Double spare tire conveyor
- Axle shaft elevator addition
- Fire extinguisher closet and fire extinguisher tube
- Tire mark according to request
- RAL color codes according to request
Dampper Trailer Group, Semi Trailers, Dumper, Since Tilting Trailer-Tilting