Rivet Fastening Machine Km 400 P

Kanmak Makina KM 400 P
– BUTTON LOCKING – RIVET LOCKING – RIVET LOCKING

– EYE-EYE ATTACHMENT- STUCKING

– LOCK LOCK
– HOOK LOCKING - TROP HIGHING - HOOK LOCKING
– PANTS AND BOOTS HOOK may snap.
Rivet Fastening Machine

Rivet Fastening Machine KM 400 P

Kanmak Makina KM 400 P Model electric rivet works with 220 volt electricity. Electronically controlled control system is available. The machine works with the pressing technique. The snap fasteners placed on the lower and upper chambers of the machine perform the snapping operation by means of the pressure power of the machine through the pedal.

Our KM 400 P riveting machine is completely domestic production. Regarding its functionality, our KM 400P machine is guaranteed for two years against fabrication defects. The working system of our machine works with shocking.

Its body is produced from cast iron. The coil used in the coil is made of copper wire and weighs 2 kg. The spindle system is stainless. The bushing system, on the other hand, consists of the red bushing used in the starter motor of the vehicles. This bushing system is self-lubricating

As Kanmak Makina, these are our biggest differences from our other competitors.

You can change the impact power from the electronic card of our machine according to the accessory you will use. Our machine is suitable for all rivet fastening works used in textiles. It can also be used in eyelet fastening works by changing the mold. Rivet fastening on trousers, riveting or riveting on all kinds of fabric, tarpaulin-like materials, fastening buttons in apparel products. It can be used with suitable mold selections.

It is produced in leather and thick materials, suitable for use in car covers, shoes, bags, leather belts, hats, tarpaulin, advertisement, automotive sectors.

It can be adjusted for use thanks to the molds suitable for the work to be done according to these sectors. Boat Hook-Drilling and Cutting Works Can Be Done With Special Molds

RIVET ATTACHING MACHINE Kanmak Makina KM 400 P

TECHNICIAL SPECIFICATIONS

– It works with single-phase (220V) electricity. – He can hit EIGHT THOUSAND – TEN THOUSANDS per day.

– Inflicts 1 hit in 1 second at most. – It is a very fast working machine.

– Body casting. – The coil is copper. – Foot profile. – Refrigerated system.

– It can hit 1300 kg per square meter.

– The sensor is optionally attached to prevent laser marking and not pressing the hand when it sees it.

– The stroke power is adjusted by numbers from the electronic card (0-99).

-The electronic card of our machine has a counter, it counts the number of pieces it prints.

Kanmak Makina KM 400 P
– BUTTON – RIVET – RIVET- EYELET – STICKE- LOCK
– HOOK- TROP-COPPER
– PANTS AND BOOTS HOOK may snap.
– It can do DRILLING. Kanmak Makina manufactures Accessory Fastening Machines .

Kanmak KM 400 P RIVET MACHINE  

Kanmak Makina Manufacturing – Online Sales With Kanmak Machinery Assurance

Installment to Credit Card

We offer installment options up to 12 months for all credit cards.

Same day shipping.