Power Trowel

Gasoline Polishing Machine 

• The engine has an automatic switch that will not stop or start the engine when oil is low.
• It has an electronic circuit breaker system that will stop the machine by automatically stopping the engine when control of the machine in use is lost. The system control handle is located on the handle within easy reach of the user.
• There is a sheet metal lifting hook at a single point in the center of gravity so that the machine can be lifted safely and balanced.
• There is a protection cable duct pipe under the lever body to protect the throttle and stop cable assembly.
• The machine's throttle assembly is located on the handle within easy reach of the user.
• In the connection between the arm and the reducer, sheet metal connection elements with anti-breakage support are used.
• It can perform polishing with a diameter of 915 mm with 4 trowel blades made of hardened steel.
• Blade rotation speeds according to revolution during polishing  It is 139 rpm.
• During polishing, the trowel blades can be inclined between 0º and 20º.
• The trowel adjustment device is mounted inside the arm body. The butterfly that provides adjustment is on the arm within easy reach of the user.
• Fasteners are compatible with Besto and Polyemid trowel mounting.
• It is a floor processing equipment used for finishing, smoothing and polishing concrete surfaces. Field concretes, parking lots, industrial and commercial buildings, warehouses, airports and shopping mall construction sites are the main areas of use.