Power Trowel Machine

For safe and stable lifting of the machine, a single-point steel lifting hook is placed at the center of gravity.

• • A protective cable channel pipe is located under the arm body to protect the cable assembly.
• • Reinforced steel connection elements are used in the arm-to-gearbox connection to prevent breakage.
• • The control lever starts the motor when pressed after the switch is turned on, and automatically cuts the circuit and stops the motor when released. The control lever is positioned on the handle, within easy reach of the operator.
• • The original electric motor clutch pulley and unit are used to regulate speed variations in the motor, preventing system damage.
• • With 4 hardened steel blades, it can trowel with a diameter of 700 mm.
• • During troweling, blade rotation speeds vary between 61 – 124 rpm depending on motor speed.
• • During troweling, the blades can be angled between 0º and 20º.
• • The trowel adjustment system is mounted inside the arm body. The butterfly lever that adjusts the angle is located conveniently on the handle.
• • The connection elements are compatible with Polyamide trowel mounting.
• • It is a surface finishing machine used to trowel, smooth, and polish concrete surfaces. Its main application areas include site concrete, parking lots, industrial and commercial buildings, warehouses, airports, and shopping mall construction sites.

TECHNICAL SPECIFICATIONS