Plastic Mould Hot Runner Unit and Hot Runner Systems

ASYP models are designed specifically for plastic injection molds, hot runner control modules allows you to make precise temperature control.

Designed for mold temperature control systems have been produced.
The one-eyed hot runner temperature control of the mold system.
Singles hot runner module, we offer our campaigns temperature control device ..
Thermal control devices SSR, (or relay) complete with elements such as insurance leads and are ready to run the module.

TECHNICAL SPECIFICATIONS OF OUR PRODUCTS
PID Control
1 ° C Control accuracy
Adjustable soft-start
Adjustable standby mode temperature
THERMOCOUPLE work (Proportional operation)
600 ° C max. fe-const (j type) thermocouple
Thermocouple failure warning in the screen
Low and high temperature alarm relay outputs (250 V, 8 A relays)
For each channel type V, 10 A fast-automatic insurance
Imported 25 for each channel solid state or relay
2x4 digits display
Easily adjustable from the front panel keys
selectable frequencies
Check mark the desired value between 0.001 and 9.999 multiplied by the calibration can be performed
Adjustable between 1 and 3 digits with decimal point.
Sensor input type can be selected on the keypad.
Output contact or continuous output in the range of 0.1 to 999.9 seconds to pull the set.
Selectable parameter security.
Alarm output and audible warning if the desired temperature overshoot. (Optional)
Pv CE mark according to EN standards.
1-2-4-6-8-10-12-packages stock delivery ..



Hot runner systems,
Plastic mold temperature control,
Plastic runner, hot runner board,
Plastic heat device,
Process control devices,
Hot runner, level control devices,
Hot runner system, hot runner nozzles,
Hot runner nozzle, hot runner heaters,
Heat control devices, temperature control systems,
Temperature control, mold gating system, do not hesitate to contact ..