N59 Bucket Scale

N59 Bucket Scale

Bucket Scale (Wheel Loader Scale) is a dynamic weighing and automatic picking equipment mounted on a wheel loader.
When the lift arm of the wheel loader is lifted to a certain height, the position sensor triggers the weighing operation, and the scale indicator collects the oil pressure signal from the lower and upper oil chambers of the arm lift oil cylinder.
After signal processing and compensation, Single bucket loading weight will be automatically taken and summed as Total Loading Weight.
The operator evaluates whether the current Single bucket loading weight is valid based on the alarm messages and can verify the final bucket loading weight against the negative bias value.

General features

EMC design that can be used in industrial areas with its high anti jamming feature.
DC24V power input with reverse polarity protection.
32-bit ARM CPU with arithmetic speed of 72MHz and higher.
Dustproof stainless steel box with IP65 protection level.
640×480 TFT display.
24-bit ∑- △ ADC with 1/1,000,000 Resolution.
High sampling frequency 400Hz.
Anti-vibration filtering software specially developed for fast, precise and stable weighing
Special Acceleration compensation algorithm.
Ability to save and store 10000 Weighing units in memory.
50 Single bucket weighing records in each record.

System Accuracy

Accuracy class: III
Verified accuracy for weigh indicator: 0.02%.
Accuracy of single bucket weighing: 0.5%~1.0%.
Total weighing accuracy: 1.0%.

System Configuration

1 Weighing indicator with built-in thermal printer
1 x position sensor
2 Hydraulic oil pressure sensors
2 x 3-way connection plates
1 piece of mounting mechanism