Milk Cooling Tank Cemre Sogutma.From Factory To Ring.300 Liters

OUR DOCUMENT OF DOMESTIC MATERIALS IS AVAILABLE AND YOU CAN GET KOSKEP SUPPORT.

WE HAVE CE CERTIFICATE

HAS SERIAL NUMBER

HIGH QUALITY PRODUCT - BOILER MADE OF 304 ASL STAINLESS STEEL SHEET.

-EUROPEAN ENGINE.

-404 CLASS A COOLING

- ROLBONT COOLING TECHNOLOGY-

-DIGITAL CONTROL SYSTEM

-DIGITAL SCALE- KELİ BRAND

-INTELLIGENT MIXER FEATURE

-MOTOR PHASE PROTECTION- THERMIC MAGNETIC SARTEL

-CLOSED PACKAGE UNIT

-INSTALLATION BY SERVICE

-2 YEARS WARRANTY

TECHNICIAL SPECIFICATIONS

• It is completely made of AISI 304 quality stainless steel.

• The base of the 1st wall is 2 mm and there is a 1 mm Ep type rollbond heat exchanger plate coupled to the wall.

• 1st wall body is 1.5 mm.

• The insulating wall is 1 mm AISI 304 quality stainless steel.

• There is one 18KW 40 d/d reducer and a stainless steel mixer blade attached to it. There are 2 mixers in our tanks of 6 tons and above.

• The product outlet has a DN 50 male union butterfly valve.

• The insulation gap is 50 mm thick and insulated with polyurethane foam material.

• Our vertical type tanks have a single cover system.

• Each tank has a special digital milk weighing system.

• It has been designed to leave zero liquid inside.

• Tank body is coupled on a solid chassis.

• Welded areas are 1st class Argon TIG welding and 1st class smooth polished.

• The refrigerant evaporator (rollbond) has been subjected to a test pressure of 30 bar.


COOLING GROUP


• Minimum amount of gas charge 3KG per tank

• A 404 gas cooled provides low electricity consumption.

• Possibility of cooling without icing even in low milk quantities

• It provides the opportunity to cool each milking (33 ºC – 38ºC) at ambient temperature from 35 ºC to 4ºC in less than 3 hours.

Tanks are produced in 2 / B / II class, except for special requests.

• The Cooling Group has a package unit and is coupled to the solid chassis on the tank.

Italian Aspera -French Cubigel & Sanyo AMERICAN KOPELAND are used as engine brand in cooling groups.

CEMRE SOGUTMA FACTORY: MARUKATCILAR SITE SEHİT MEHMET SOK NO 6 BURDUR.