Lowbed Semi Trailer With 5 Axles (Extendable)

TECHNICAL SPECIFICATIONS OF EXTENSIONAL 5 AXLE LOW BED

RACK

-  Made of high-strength steel  box rack

-  level 1000,2000,3000,4000,5000,6000 mm  mechanical extension from the centre

-  Rack is supported with 160 NPI axle beams that crosses rack

AXLE SHAFT

-  4 axle shafts with drum and air suspension with the capacity of 12 tons, are used

-  4. and 5th axle shaft can be steered

SUSPENSION

-  Parabolic double deck Z springs and dashpots

ELEVATING FRONT AXLE SHAFT

-  Remote operated elevating system for front axle shaft in cabin

TIRES AND RIMS

-        235/75 R 17.5

-        245/70 R 17.5 sizes 20+1 tires are used.

ELECTRICAL EQUIPMENT

-  It is suitable forSAE standards and Tüv regulations

- Electricity is provided by 7 pin plug from vehicle

-  There are necessary traffic advisory and stoplights on both sides

-  There are backlights, brake lights, license plate lamps, trailer reflectors and orange warning lights on the sides

BRAKE EQUIPMENT

-  71/320/ewg ff brake system according to EC standards.

-  Automatic slacks, 2 spring brake chambers and 2 service brake chambers.

-  4S / 3M EBS and RSS that provides safe driving systemagainst rollover(Balance Control System).

-  Air leaks in trailer are blocked by Sweden patented Ruffels union system

KING-PIN

-  Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used

CONVEYOR LEGS      

-  On the front: 24 tons Mechanical trailer legs

-  On the behind: Manuel support legs

BACK ACCESS RAMP    

-  Made from 160 NPU

-  With electric engine

-  Remote operated

-  Back legs with hydraulic piston

FLOOR

-  Diamond embossed sheet and solid floor on tires and sides

PAINT

-  Rack and superstructure  are painted in paint drying oven by Washing + Sanding + 2+1 coat Acrylic Paint

COLOR

-  It will be specified according to customer request

STANDARD ACCESSORIES

-  2 x 11 expanding brackets(300+300 mm)

-  2 x 11 load binding ring

-  1 x tool closet

-  2 x Bike safety bar

-  1 x Tire weld and holder

-  Plate front panel(height: 600 mm)

§  Aluminum panels on the side in suspension beam area(height 600 mm)

OPTIONAL SPECIFICATIONS

§  European axle shaft group and all kind of equipments

§  Aluminum rims

§  Hydraulic suspension beam

§  Double spare tire conveyor

§  Fire extinguisher closet and fire extinguisher tube

§  Tire mark according to request

§  RAL color codes according to request