Lowbed Semi Trailer With 4 Axles (Extendable)

TECHNICAL SPECIFICATIONS OF 4 EXTENSIONAL AXLE LOW BED

RACK

-  Made of high-strength steel  box rack

-  1000,2000,3000,4000,5000,6000 mm level mechanical extension from the centre

-  Side racks are connected to main rack with 8 mm axle beams

AXLE SHAFT

-  4 axle shafts with drum and air suspension with the capacity of 12 tons, are used

-  3. and 4th axle shaft can be steered

SUSPENSION

-  Parabolic double deck Z springs and dashpots

ELEVATING FONT AXLE SHAFT

-  Remote operated elevating system for front axle shaft in cabin

TIRES AND RIMS

·-        235/75 R 17.5

·-        245/70 R 17.5 sizes 16+1 tires are used.

ELECTRICAL EQUIPMENT

-  It is suitable forSAE standards and Tüv regulations

-  Electricity is provided by 7 pin plug from vehicle

-  There are necessary traffic advisory and stoplights on both sides

-  There are backlights, brake lights,  license plate lamp, trailer reflectors and orange warning lights on the sides

BRAKE EQUIPMENT

-  71/320/ewg ff brake system according to EC standards.

-  Automatic slacks, 2 spring brake chambers and 2 service brake chambers.

-  4S / 3M EBS and RSS that provides safe driving systemagainst rollover(Balance Control System).

-  Air leaks in trailer are blocked by Sweden patented Ruffels union system

KING-PIN

-  Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used

CONVEYOR LEGS      

-  On the front: 24 tons mechanical trailer legs

-  On the behind: Manuel support legs

BACK ACCESS RAMP    

-  Made from 160 NPU

-  With electric engine

-  Remote operated

-  Back legs with hydraulic piston

FLOOR

-  Diamond embossed plate and solid floor on tires and sides

PAINT

-  Rack and superstructure  are painted in paint drying oven by Washing + Sanding + 2+1 coat Acrylic Paint

COLOR

-  It will be specified according to customer request

STANDARD ACCESSORIES

-  2 x 9 expanding brackets(300+300 mm)

-  2 x 9 load binding ring

-  1 x tool closet

-  2 x Bike safety bar

-  1 x Tire weld and holder

-  Plate front panel(height: 600 mm)

-  Aluminum panels on the side in suspension beam area(height 600 mm)

OPTIONAL SPECIFICATIONS

-  European axle shaft group and all kind of equipments

-  Aluminum rims

-  Hydraulic suspension beam

-  Double spare tire conveyor

-  Fire extinguisher closet and fire extinguisher tube

-  Tire mark according to request

-  RAL color codes according to request