FS Pancake Loadcell

FS pancake Loadcell is produced using special alloy steels and optional stainless steel versions are also available.

FSH pancake loadcell alloy steel models are hardened by heat treatment and cleaned by sandblasting method. All surfaces are coated with Nickel homogeneously and become more resistant to corrosion.

FS pancake Loadcell is produced using Shear type strain gauges, and while 4 strain gauges are used in normal loadcells, FS models can increase this number to 8 or 16, so they give more linear output because of the strain signals from different points and become more suitable for use in force testing machines.

FS pancake Loadcell is perforated and grooved and has a mounting kit attached to the bottom.

FS pancake Loadcells are tested according to the test procedures specified in the OIML R60 recommendations.

FS pancake Loadcell used in force testing machines, silo, tank and industrial areas.

More reliable and accurate weighing results are obtained with specially manufactured mounting kits for silo and tank weighing.

FSH pancake loadcell is suitable for measurements in narrow areas due to its low height.

The measuring zone is welded with stainless steel covers to make it resistant to all kinds of adverse environmental conditions, dust and water protection level is IP67 (EN 60529)

FS pancake Loadcell has more strain gauge than normal load cells with its arm type structure, therefore it is more sensitive and highly resistant to lateral loads.

Cable;

FS pancake Loadcell is equipped with 4x022mm2 PVC flame retardant outer sheath, Aluminum and tinned copper braided shielded cable to protect against external noise and signals.

Optionally, armored or exproof silicon cables can be preferred.

FSH pancake loadcell are more resistant to external influences with armored cables, also provide protection from rodents such as mice.

Silicone cables provide excellent heat shield in high temperature working environments, can be used up to 180 ° C continuous temperature and short term up to 220 ° C. Silicone cables are used in both high and low temperatures up to -60 ° C thanks to their excellent climate resistance.

If you would like any more information about FSH pancake loadcell, please contact us and a member of our team would be happy to provide support.Kobastar is always with you.

Pancake Loadcell Application

– Tank and Silo weighing

– Force Testing Machine

– Compression Load

– Utilizes metal foil strain gauge technology

– Highly resistant to off-axis loading

FS pancake loadcell Features

– Capacity Range: 2 to 100 tons

– Alloy steel and stainless steel

– IP67 Protection