Eng Mineral Wet Drum Magnetıc Separator

Concurrent Design (CC)

• Homogeneous feed collector
• The drum armor rotates in the same direction as the flow direction of the fed material.
• Adjustable outlet chambers at the bottom of the tank for non-magnetic material
• Selection of bottom outlet chambers to adjust the solid-liquid balance
• Recommended for coarse material grains

Countercurrent Design (CTC)

• The feed is distributed over the entire magnetic surface from the lowest point of the tank.
• The channel length is kept at maximum length by the drum armor for highest magnetic recovery and quality.
• The drum rotates in the opposite direction to the flow direction of the material.
• There is a full width waste outlet section that can tolerate quite large fluctuations in flow.
• Increased magnetic field exposure of magnetic particles
• Iron concentration is also recommended for higher yields
• Special centrifugal distributor is recommended for feeding

Counter Rotation (CR)

• A full width feed collector directs the material into the preparation chamber.
• In the magnetic concentrate outlet section, nozzle feed is provided to the drum surface.
• Maximum magnetic conveying area with long channel for highest magnetic recovery
• The drum armor rotates in the opposite direction to the flow direction of the material.
• There is a full-width tailings outlet section that can tolerate quite large fluctuations in flow.
• Maximum dewatered concentrate
• Recommended for coal washing plants