Bombe Edge Bending Machine (Bsm)

Convex Bending Machine bends the ends of curved or non-convex lids used in the industry to close the bottom and ceilings of pressurized or non-pressurized, thin or thick-walled, cylindrical, metal containers. There is a hole in the center part of the cover.

In the Camber Bending Machine, the edge of the camber head is placed neatly between two dies fixed on the shafts, one of which is fixed on the upper reducer and the other is idle at the bottom. Spinning begins when the upper spindle operates. Then hydraulic cylinder number 3 is moved up. The bending process of the edges of the curved ends is carried out by the linear movement of hydraulic cylinders numbered 1 and 2. Then, this process is repeated two or more times until the expected values are obtained according to thickness, depth and diameter measurements. Moreover, the Cambe Bending Machine provides maximum efficiency in the process of shaping the edge of the circular part into a completely circular shape for full circular bending. Camber Bending Machine provides high rigidity and stability during flanging. The forming roller, made of high-strength steel and induction hardened, is shaped appropriately according to the radius of the edge to be obtained. The rolling process on the Dome Bending Machine can be done in manual or automatic mode. Dome Bending Machine can be adjusted in height and direction thanks to its hydraulic system. Production can be made at the required radius with the material centering screw, material fixing bolt, bottom flange roller, hydraulic movable flange bottom support system. High torque upper flange roller increases the rotation speed and ensures that the process is completed in a short time.