Air Conditioning Plant

It is a central air conditioning system. The air conditioned by the air handling unit is blown to the necessary spaces through ducts. In some systems, supply air is collected again, mixed with return air to a certain extent, or 100% fresh air can be used.

Air ducts are made of galvanized, aluminum, stainless steel, textile material (fabric duct) depending on the place of use and purpose; They are manufactured in round, oval or rectangular cross-section. Different types of paint are applied to the air ducts where necessary.

In the air conditioning system, air ducts are insulated from the inside or outside with various materials for heat and sound insulation.

The purpose of insulation is to prevent heat loss and sweating in the canals. In places where there is acoustic concern, silencers can be used at the device entrance and exit.

Air handling units contain aspirator, exhaust, filter, mixture, heater, cooler, humidification and fan cells.

Air conditioning units are generally manufactured with galvanized sheet metal. They have various types of skeletal systems. The air conditioning unit body is polyurethane charged between the double layer of sheet metal. Sealing is ensured by suitable wicks on the covers.

Heating and cooling coils have copper tubes and aluminum fin fins. Filters are selected with different sensitivities depending on the area of use. Operating rooms, clean rooms, etc. When using hygienic type air handling units in sensitive environments, HEPA filters can be used with sensitivity up to 99.9999% at the blowing point.

Various automation elements are used in air handling units for heating, cooling, humidification, filtration and fresh air rate. Automation elements can be electrical or pneumatic depending on where they are used. By using a frequency-controlled fan motor, we can achieve optimum efficiency while saving energy.