Automatic Cutting Machine Full Model Km 1850
year
Automatic Cutting Machine Full Model KM 1850 Cutting Machine
Automatic weaving cut-off ball fabric slicing machine
TECHNICAL DETAIL:
Automatic Cutting Machine Full Model KM 1850 Cutting Machine
Automatic weaving cut-off ball fabric slicing machine
Produced specifically for hard ball fabrics
Automatic Cutting Machine
Our Slicing Machine KM 1850
FELT CAN CUT
MACHINE CAPACITY:
Cutting Boyu 2000mm
Cutting Range: 1mm - 2000mm
Shaft Thickness Range: 3 inch
Max Diameter Width: 500mm
Cutting Sensitivity: + -00.1mm
Automatic Cutting (Slicing) Machine
FUNCTIONS:
Manual and half-automatic operation
LCD 7 inch color screen
Speed setting of all moving parts
Knife sharpening (number and time control)
Spray liquid spraying (number and time control)
Dimension and cut piece setting (5pcs)
Motors forward and reverse
Automatic reset
500mm air steel knife
- NOWOMON SYSTEM
- 500 MM Knife
SERVO SYSTEM MOTOR-REGULATION
-DOKUNMATIC 7 INCH DISPLAY
-Closed-CAB-PROTECTION-Hush my
-Water, COOLING
-11.5 KW
- 75 MM LOCK ROLL SHAFT
7inch PLC / OPERATOR PANEL:
All mechanical and electrical hardware systems on the machine are PLC controlled.
There is a touch screen operator panel which can control all the functions on the machine and is very easy to use
OTHER TERMS:
RECEIVE INSTALLATION AND ACTIVATION:
1 assembly element is assigned by KANMAK MAKİNA.
You should inform your assembly request at least 1 week in advance.
In domestic assemblies, intercity transportation expenses belong to KANMAK MAKINA company, accommodation expenses and transfers between hotel, business and hotel are taken by ALICI firm.
Min. The 1.5 ton capacity forklift belongs to the receiving company.
During the installation, in order to assist the installation personnel;
1 mechanical / 1 electrical personnel, RECEIVER must be assigned by the firm.
In addition, 1 construction officer should be provided when necessary.
Mounting time max. 1 day.
An office should be allocated, if possible, for the use of our installation staff.
Before assembly request; the machine must be placed on the assembly site, but the packaging should not be opened. The packages and contents that are opened are not covered by the warranty.
The electrical system and its materials belonging to the board belong to the receiving company.
Up to the main conditioner inlet The air line and the materials belonging to it belong to the receiving company.
The construction of the necessary construction works belongs to the buyer.
WARRANTY AND SERVICE
Warranty period is 12 months against manufacturing faults. This period begins when the machine is commissioned / trial production begins. If the buyer is delaying installation for various reasons, the warranty period extends up to 15 months from the date of manufacture.
During the warranty period, spare part needs arising from manufacturing faults are free.
The warranty of the consumables is the guarantee of their manufacturers.
After the end of the warranty period, the service is provided but the cost of the travel and accommodation of the service worker, the daily working fee and the material expenses to be used belong to the receiving company. The study fee is based on the values at that time.
PACKAGING:
Partially packed with cardboard, foam and stretch film materials to prevent abrasions during transportation.
TRANSPORT + INSURANCE:
TRANSPORTATION AND INSURANCE ARE TO THE RECEIVER COMPANY.
DELIVERY METHOD:
60 business days FACTORY OUTPUT after receipt of order confirmation and advance payment.
This does not include delays that may arise, especially due to the input of imported materials, and delays due to natural disasters.