Automatic Carpet Washing Machine Brs260

CLEANVAC AUTOMATIC RAIL SYSTEM CARPET WASHING MACHINE BRS260

USER MANUAL

It is placed on the carpet washing platform and how much detergent and water to use while cleaning the carpet and how long to rinse will be entered into the system through the program and stored in memory from the control panel. Thanks to this washing program, the desired cleaning quality is used as standard and the desired number of times. The operator can vary the washing time with the desired detergent and water consumption. He can apply the program he wants as many times as he wants by keeping it in memory.

BRS 260 TECHNICAL SPECIFICATIONS

• Brushing Unit (Piece): 3
• Brush Diameter (Cm.): 42
• Brush Motor Speed (rpm): 1.400
• Brush Speed (rpm): 160
• Brush Motor Power (kw): 2.2
• Brush Motor Power Transfer Type: With Transmission
• Brush Motor Voltage (Volt-Hz): 380-50
• Total Power (kw.): 8.5
• Countertop Width: 2600 *Bench Length: 3770
• Automatic carpet washing Capacity (m2/hour) (min./max): 72-117
• Sensor controlled
• PLC and manual control possibility

ADVANTAGES OF AUTOMATIC CARPET WASHING MACHINE

Saves 80% of labor, chemicals, water and time

Since the automatic carpet washing machine is computer-controlled, it does not skip the carpet and brushes every square millimeter equally.

While the maximum pressure applied to the carpet with hand washing machines is 50 kg, the pressure applied to the carpet with an automatic carpet washing machine is 150 kg.

When washing with hand machines, the brush will press unevenly depending on usage, leaving fine lines on the carpet. Automatic carpet washing machine brushes apply a distributed load on the table and a balanced load on the specified axis, leaving no streaks on the carpet after cleaning.

Hand scrubbers rotate in one direction. Carpet that is already flat will cause the hairs to lie down even more. The brushes of the automatic carpet washing machine can rotate in different directions. This feature both lifts the carpet fluff and removes the dirt and fluff that may remain between the carpet fluff by blowing them away.

The water used for hand washing may be more or less than necessary, depending on the employee's opinion. In an automatic carpet washing machine, preferably a double-stage pre-wash or rinse can be performed. This feature can be made with standard selections from the PLC screen panel.

In hand washing, the speed of the employee and the carpet washing machine is constant and does not change, whether the carpet is slightly dirty or very dirty. In the automatic carpet washing machine, both the main car speed and the brush speed are adjusted in 40 different ways.

In a hand washing machine, the employee's attention is not the same for 10 hours, but in an automatic carpet washing machine, defined speed values, the number of washings can be done at the same quality standard thousands of times without any limitation of hours.

Although the workload in the carpet washing industry tends to spread over 12 months with the developing carpet washing and carpet drying machines, there are busy months called seasons. It is necessary to employ more staff during these months. It is difficult to train employees or get efficiency from these employees in a short time. Or, hiring employees during the season and firing them at the end of the season will cause problems. Carpet washing by hand is a heavy job and it is difficult to find personnel. Since the automatic carpet washing machine saves 80% on labor, it is no longer an employee-based job. There is no need for trained personnel. Most of the carpet washing job is done by automatic carpet washing machine.

18% VAT is NOT INCLUDED in our prices