Tural Makina Tm-1800 / Tc-605 Pieces Fabric Paper Transfer Printing Machine

TM-1800 / TC-605 Piece by Quantity Fabric Paper Transfer Printing

Sublimation Calender Machine Technical Specifications

• Our cylinder widths are from 1800 mm to 2700 mm, the price increases according to the width of the cylinder.
• The cylinder system is oil heated and the cylinder diameter is Ø 610mm. is The most important feature that distinguishes this machine from other machines is that it has a system that reduces oil in the cylinder system as a standard feature.
• Average 220 meters per hour. between production.
• 1800 meters in 10 hours. production.
• 35 Kw electrical power (Three-phase).
• Average electricity consumption for the TM-1900 Series is 17Kw hours based on production.
• 3.0 / 4.5 m. minute rate.
• Our felt is Nomex felt.
• Wrappers with tension adjustment that wraps the paper delivery and the output paper. The machine reaches 220 C 70 minutes after it is turned on.
• 4 air spindles for reeling and winding paper in the machine.
• 7-inch LCD control panel and system that instantly displays the electricity burned by the machine during operation and calculates it in kW and TL
• Machine warning system in possible sudden temperature increase or temperature decrease.
• There are non-static, milk-laminated, illuminated glass fabric laying table, 3 fabric carrier conveyors and special static receivers that take the static electricity of the paper and fabric, which will help the machine production...
• Smoke absorbing fan that carries the smoke from the bottom of the converter upwards during the transfer.
• Felt cooling auxiliary fan and automatic shut-off system.
• Automatic adjustment of felt centering system with air control.
• External surface temperature sensing system.
• Pneumatic crushing system for crushing the curved edges of stitched thick goods.
• In Emergency Drums, the machine restarts for a short time and stops itself.
• It has an automatic felt centering system.
• Tural Makina confirms that there is no temperature difference over the entire surface of the cylinder.

SAFETY AND CONTROL FEATURES

• For emergencies, 4 Emergency buttons, 1 rope switch, when these switches are activated, the machine runs full back and stops.
• For safety, the master cylinder works backwards.
• Barrier preventing hand entry in front of the machine.
• The machine gives an automatic alarm when the felt is out of control.
• There is a special precaution system against high heating.
• There is a manual lever, UPS and Generator connection inlets to be turned for the purpose of cooling the machine for power cuts.