Pft G4 Gypsum Plaster and Ready Plaster Machine

PFT G 4 – European champion among non-stop mixed pumps, an economically efficient pump on the face of it.

It can be used for any pumpable mortar.

So far, over 60,000 machines have been sold, representing.

Thanks to its efficiency, quiet and technical excellence, the PFT G 4 is the “NUMBER ONE” in Europe. The PFT G 4 is a continuously working mixed machine for all dry ready-mixed mortars.

This machine can be filled using bagged material and a delivery shroud or a SILOMAT injection shroud.

This machine includes portable units, its small and handy size and light weight allow for easy and convenient transport.

.SCOPE OF APPLICATION

Pumpable, dry ready mortars,

e.g:

• Machine applied alabaster plaster

• Alabaster-lime plasters

• Cement plasters

• Lime plasters

• Cement-lime plasters

• Masonry mortars

• Insulating plasters

• Slotted mortars

• Reinforced and adhesive mortars

• Floor plaster screed base

• Fango materials

• … and many more ADVANTAGES

• Long transport distance

• Product output from 6 to 55 l/min with only one mixed tube, simply by changing the pump

• Pressure off with compressor

• Universally applicable

• Long service life

• Can be combined with all PFT machine variants

• Very economical especially when used with PFT SILOMAT

• Minimal repair

• Simple and fast cleaning

• Easy to use • Low filling height

• Can be used directly under the container/silo

• Fully equipped

• Powder coated

• Large direction pulley

• Clear documentation

• Safety test was carried out by Bauberufsgenossenschaft BBG (Accident Prevention and Insurance Agency).

• According to the CE-Directive

.PFT G 4 Standard 5.5 kW

• Pumping unit D 6-3 TWISTER

• Geared motor 0.75 kW, 28 rpm

• Geared motor 5.5 kW, 385 rpm with two-stage tilt commutator

• Control box with phase sequence relay

• Water meter 150 – 1,500 l/h cpl.

• Mixing pipe G 4/G 5 with matching flange

• RONDO 25 mm, 10 m, with cpl hydraulic coupling• Water/air hose 1/2 “, 11 m, cpl. geka

• Mixer pipe cleaner D- and R-pumps, galvanized

• Connector for remote control

• Adapter coupling 35-/25 male

• 35 female parts cleaning coupling with Geka coupling

• Tool bag

• Operating instructions