Medical Hose Machine

APM 25 Medical Hose Machine (Corrugator)

GENERAL INFORMATION

Our compact medical hose line has a capacity to produce 1200 meters of product per hour.

Our line, which is completely domestically produced, is produced at the highest quality.

The entire line is controlled from a single PLC panel,

APM 25 Medical Hose Machine (Corrugator)

Working Principles: Raw material (PP - PE) is loaded with 20 kg of raw material per hour. It automatically pulls it.

Automatic heat settings are made from the PLC screen according to the type of raw material (PP - PE) from 180 degrees to 250 degrees.

Machine operation settings are made in approximately 1 hour. Warming up occurs.

The machine is controlled by a worker.

And the work starts.

Automatic cutting dimensions are set.

It is set according to the thickness of the product you will produce. Automatic Nonstop 24 production takes place at the speed you want,

Meanwhile, air pressure, Cold water pressures are adjusted. It varies according to the raw material (Min: Cools under 10 - 15 desrece. Air pressure 6 - 8 bar.

Since these systems are composite, they are adjusted automatically.

Dimensions: 100 cm x 200 cm

Power: 19 KW

Inside the Cooler (Chiller)

Screw Compressor (Atlaskoppo)

Diameter: 40 Extruder

Raw Material: (PE - PP)

Automatic Raw Material Drawing

PLC Screen Control

Diameter: 10 to - Diameter 25

Output products: Baby - Child - Adult - Life Support Unit Medical Hoses Machines Manufacturing