Fully Automatic Ultrasonic Tube Filling Machine

For detailed information and price, please call our contact number.Machine Information: ​* The product filling section of the machine is made of 316 quality stainless steel.* Min. of the tube to be produced. diameter is 22 mm – max.50 mm.* The volume of the filling unit is min 10 ml – max. 300 ml. Dir* The machine can be adjusted according to the length and diameter of the tubes to be filled.* The tube filling capacity of the machine is 30-35 min/piece.* The filling unit works with volume filling logic, the mouth of the filling nozzle unit is pneumatic.It closes as .* Nozzle air blowing technology prevents flaking after filling.* Easy adjustment with the flywheel lever and indicator technology at the stations* Horn cracking failures are prevented with the new generation horn technology.* New generation actuator system is easier to clean and assemble, faster and wear-free.is blocked.* Filling Station is Servo Controlled, Weight Adjustment and Speeds are on the Screenis provided.* Tube molds with new generation collet system (used with old pins due to rust and corrosion)systems have been removed).* The cutting station is designed as a double blade and precautions have been taken against blunting.* The numerator date coding jaw can be easily removed and there will be no jamming of numbers.It was designed as follows.

* With the on-screen recipe system, settings can be saved with 200 recipes.* Instead of buying a new mold due to tube lengths being +-30mm long or shortAdjustment positions at stations have been increased.* The places where the product passes and comes into contact are made of 316 quality stainless steel and are mirror polished.* Chassis parts are made of steel extruded profile and special oven painted.* The feed shooter set of the machine is provided free of charge up to 19 diameter and 50 diameter.* The machine consumes 250 liters of air per minute/sec.* The machine has a 10 inch touch screen control panel and plc control.has.* Ability to intervene by connecting the machine, plc and operator panel via the internetand has the ability to send programs. Windows based operating system on plc panelThere are.* BANNER brand sensor is used as the product rotation control sensor. * The pneumatic equipment used in the machine is PEMAKS and BOSCH RexRot brands.It is of GERMAN origin.* Product point promotion can be easily done via the operator panel.* Pneumatic piston sensors are SICK brand and sensors of German origin are used.* The rotary table has 10 stations and is protected against product jamming and operator handshaking.It is safe.* Weight 850 kg* 380 Volts